|
DLCO Australia is a
50/50 joint venture company formed by Flat Glass Industries and
Dah-Ling Hardware company. The joint venture manufactures products
in both Australia and Taiwan. DLCO Australia was established to
promote products to the Australian, New Zealand, Indian and other
markets determined by the joint venture partners.
DLCO Australia
promotes products through architects and direct users via direct
selling, exhibitions, detailed catalogues and sound technical support.
|
|
SPIDER FITTINGS
DLCO
Australia manufacture a comprehensive range of:-
Spider fittings
Articulated
Ball Joint Glass Connectors
Cable Truss Assemblies
Adjustable
Tension Rods with Clevis
Manufactured in Marine Grade 316 Stainless
Steel
|
All
Spider Fittings
Manufactured by DLCO
Australia Carry an Australian
Engineers Certification
|
|
|
|
|
|
|
|
|
DL
10-1
2
leg spider
with fin adaptor
|
DL
10-2
4
leg with
fin adfaptor
|
DL
11-1
single
leg for
corner fixing
|
DL
11-2
2
leg for
side fixing
|
DL
11-3
3
leg for external corner fixingr
|
DL
11-4
4
leg for
central fixing
|
SHOWERSCREEN HARDWARE
|
|
The
DLCO architectural shower fitting system is manufactured
from fine drop forged brass. The CNC technology at DLCO
assures the highest quality and precision.
|
•
|
Accessories
available for 6, 8 and 10mm glass
|
|
•
>
|
|
•
|
Finishes:
Chrome plate, gold plate, satin chrome,
special finish.
|
|
|
|
|
PATCH FITTINGS
|
|
|
The
DLCO architectural patch fitting system is a comprehensive
range of accessories including door rails, handles,
floor and transom closers, produced to give commercial
fabricators, shop fitters, designers and architects
absolute freedom of design when using toughened glass.
|
•
|
Patch
bodies are manufactured from drop forged
high density aluminium alloy. The strength
of aluminium alloy allows the body to be
drilled and tapped directly.
|
|
•
|
All
components are non-corrosive
|
|
•
|
Cam
shafts, springs and screws are all stainless
steel
|
|
•
|
The
stainless steel heavy duty springs allow
the door to self close from approximately
25°
|
|
•
|
Finishes:
Chrome plate, gold plate, satin chrome,
special finish.
|
|
|
|
|
PATCH FITTINGS
|
|
|
The
DLCO architectural patch fitting system is a comprehensive
range of accessories including door rails, handles,
floor and transom closers, produced to give commercial
fabricators, shop fitters, designers and architects
absolute freedom of design when using toughened glass.
|
•
|
Patch
bodies are manufactured from drop forged
high density aluminium alloy. The strength
of aluminium alloy allows the body to be
drilled and tapped directly.
|
|
•
|
Stainless
steel inserts make for precisely fitting
components.
|
|
•
|
Only
stainless steel screws are used, avoiding
corrosion and allowing for higher tension
into patch body.
|
|
•
|
Precision
engineered covers fit snug up to glass and
all covers are corner welded.
|
|
•
|
All
DLCO patch fittings are manufactured in
an ISO9002 factory and tested to UL and
PSB Singapore standards.
|
|
•
|
Finishes:
Polished stainless steel, satin stainless
steel, polished brass, milled aluminium,
special finish.
|
|
|
|
|
|
