DIY floor safety for a small price - Global Safe Technologies announce anti-slip treatment for porcelain bathtubs and ceramic showers.

DIY floor safety from Global Safe Technologies.

Global Safe Technologies Australia is proud to announce the availability of the Residential version of its outstanding Safe Solution® Anti Slip treatment for steel Porcelain bathtubs & ceramic shower stalls just for a small price of $39.95.

Jon Eakes America's No 1 DIY expert and media personality says about the product: "Most serious falls inside a home happen in the bathroom and that's simply because this is where bare feet, water and slippery surfaces meet. Bathtub mats and anti-slip decals do make life safer, but much more difficult to keep the tub clean. Finally, here is a very light etching that is almost like a miracle.

What's amazing is you can barely tell the surface has been etched and is actually less slippery when wet than when dry!

And the tub cleans just as easily as before applying the solution. If you wipe your hand over the dry surface, you won't notice any difference at all. But, when the surface is wet, suddenly, your hand or foot stops sliding like it had running shoe traction. I always found that rather mystifying and amazing, but it really works! An added benefit is that when taking baths, smaller people can relax more with less worry about sliding under the water level.

Here's what you do. You clean your porcelain bathtub or ceramic tile shower stall with their special cleaner. Then spend only 5 minutes applying their etching solution, then immediately apply their neutralizer solution, mixing the two together. The neutralizer converts their treatment into a biodegradeable and nontoxic residue that can be safely rinsed down the drain when you're finished with the treatment. The end result is an almost invisibly changed tub, that feels like nothing happened when you pass your hand over the surface. But when you get it wet, your feet almost stick to the bottom. No more slippery surface and none of those rubber mats or difficult to clean decals.

I did say 'almost' invisible. If you were to carelessly splash the etching liquid all over the place you would see slightly dull spots. The trick is to carefully pour the entire etching solution contents onto the supplied sponge and carefully spread it over the bottom of the tub like you were painting the bottom and wanted to make a nice smooth demarcation between the bottom and the sides. Applied this way, the whole bottom will loose its high gloss, but you won't notice it. You will notice how you have seriously reduced the risk of slipping while getting in and out of the tub or taking a shower."