Eraspray spray elastomer & polyurethane from Era Polymers
Eraspray ES900EW - Non-Solvented Spray Elastomer for Portable Water
Eraspray ES900PW is a medium performance, non-solvented polyurethane spray elastomer. It is characterized
by a solids content of 100% and possesses a good abrasion resistance. This product is certified in
accordance with AS/NZS 4020 (testing of products for use in contact with drinking water). The spray applied
elastomer is for lining and membranes with good physical properties.
Additionally it offers:
- Convenient 1:1 (volume) mix ratio.
- 100% solids -Zero V.O.C.
- Fast build for very thick requirements - reduced labour and time.
- Fast curing for quick turn around times - cost effective.
- Hydrolytic stability and corrosion resistance.
- Good abrasion resistance and toughness.
- Bonds to any substrate when the appropriate surface preparation and recommended primers are used.
- Remains flexible and is therefore very suitable to handling expansion and contraction of metal associated
with climate change or equipment that is subject to movement.
- Requires plural component application equipment only.
- Designed for heavy-duty industrial applications where elastomeric coatings / linings are specified.
Eraspray AL93A
Aliphatic Polyurethane Spray Eraspray AL93A Spray Membrane is a UV light stable, non-solvented polyurethane
spray elastomer based on aliphatic chemistry. It is characterized by a solids content of 100% and possesses a
good abrasion resistance.
Additionally it offers:
- Convenient 1:1 (volume) mix ratio.
- 100% solids -Zero V.O.C.
- Fast build for very thick requirements - reduced labour and time.
- Fast curing for quick turn around times - cost effective.
- Hydrolytic stability and corrosion resistance.
- Good abrasion resistance and toughness.
- Bonds to any substrate when the appropriate surface preparation and recommended primers are used.
- Remains flexible and is therefore very suitable to handling expansion and contraction of metal associated
with climate change or equipment that is subject to movement.
- Requires plural component application equipment only.
- Designed for heavy-duty industrial applications where elastomeric coatings / linings are specified.
For further information contact:
Era Polymers Pty Ltd
phone: 02 9666 3788
fax: 02 9666 4805
web: www.erapol.com.au
| 
