Ultra-Max clear non-slip sealant by Non-Slip Floor Solutions
Ultra-Max has been developed to create a slip-resistant coating
that can be applied to timber, stone, masonry and concrete. Ultra-Max incorporates a
clear polymer aggregate with a premium clear acrylic sealer in a solvent solution. It
is capable of penetrating the substrate and cures to form a clear, tough and resilient
coating.
The slip resistance achieved with Ultra-Max varies due to the micron size of the aggregate
used.
Ultra-Max Fine will achieve a slip rating that is classified as a R11.
Ultra-Max Course will achieve a slip rating that is classified as a R12 or greater. Under
normal conditions, Ultra-Max will last from 2-5 years. Heavy traffic areas can be recoated
as required without stripping back the original coating. Surfaces coated with Ultra-Max
should be maintained by using a mild detergent with a soft broom, then rinsed.
| 
