Uni-Nail by Connolly's Timber & Flooring
Uni-Nail is designed to be laid directly onto joists, battens over
concrete, or even nailed to old timber flooring. Precision-milled to 19mm thick, the
Uni-Nail profile is designed for a tight plank-to-plank fit. Tongue and groove joints
on both sides and ends of the plank ensure a continuous and stable surface. The end
matching, which is a tongue and groove on the ends of the boards, removes the need
for ends to fall directly over a joist or batten. This results in less cutting and
less waste.
Uni-Nail tongue and groove strip flooring is designed to be nailed down. Board widths
up to 80mm can be secret-nailed into the tongue while wider boards up to 130mm are
top-nailed. As any solid timber product will be effected by changes in the moisture
content of the air, we recommend that Uni-Nail is acclimatised to its new environment
for an appropriate time. Your new floor should then be professionally installed. The
beauty of Uni-Nail is that it can handle traffic as soon as it is laid, allowing for
other trades to finish their jobs before a final sanding and application of the finish.
For optimum performance, timber flooring should be installed when the area it is going
into has reached its long-term equilibrium moisture content. This will help minimise
any movement in the boards.
For further information contact:
Connollys Timber & Flooring
Address: 148 Gaffney Street, Coburg, Vic, 3058
Phone: 03 9354 9....
Fax: 03 9350 7....
Web: www.connollys.com.au
|
