Window film and energy - WFAANZ
What is solar control film?
A polyester-based thin film of material is attached to windows and/or doors.
Polyester offers crystal clarity and can be pre-treated to accept different
types of coatings such as adhesives. The material can also be metallised and
easily laminated to other layers of film. It can be dyed or metallised by either
vacuum coating or sputtering, to produce a variety of colored and spectrally
selective films.
How does it work?
When sunlight strikes glass three things can happen:
- The energy can pass through the glass = transmittance.
- It can be reflected away from the glass = reflectance.
- It can be absorbed by the glass = absorption.
Solar film reduces the amount of visible light transmitted through glass, so
reducing glare and increasing privacy. The reflective qualities of solar window
film are well known and absorption rates are low.
How will I know what product to use to meet compliance?
Depending on your particular circumstances, many different products may be suitable.
The first step is to contact your nearest WFAANZ member, who will guide you through
the Australian Building Codes Board requirements and find which Climate Zone you
live in. That will help determine what level of solar protection you need.
What is the cost comparison?
Costs of standard solar control films compare favorably against more traditional
treatment types, such as shading devices. Installed costs of solar films typically
lie between $50 to $80 per square metre depending on performance needed and film
type. Shading devices can be anything from $150+ per square metre.
Some old films looked ugly and at night you could not see outside. Has this problem been fixed?
Technological advances have improved both the appearance and performance of window
film, ensuring both aesthetic quality and daytime privacy. Today's window films are
available with a low reflective internal coating to enhance night-time visibility.
What is the warranty on solar control window film?
Most, if not all, manufacturers warranty their window film products. Warranties for film
cover most potential defects such as demetalisation, peeling, bubbling, delaminating and
color change. Further warranty information can be obtained by consulting each manufacturer
directly.
What types of window film are there?
There are three basic categories of window film:
- Clear (non-reflective).
- Dyed (non-reflective).
- Metallised (reflective).
Clear film does not contain any metals to reflect solar radiation and is usually a
Safety Film, offering safety protection and UV control to help reduce fading.
Dyed film contains no metals and is considered non-reflective. This type of film
provides glare and fade control and reduces heat gain by solar absorption.
Metallised film has extremely thin layers of metals deposited directly onto the
polyester film substrate. These films have tremendous solar control properties
because they can reflect away significant amounts of solar radiation. The two basic
manufacturing processes for metallised films are vapor coating and sputtering.
Metallised film means that a metal is applied as a layer (coating) onto a clear
polyester film, to which another layer of polyester film is laminated. These products
are excellent solar control films capable of rejecting over 80% of all solar radiation.
The thickness of the layers can be controlled, which results in films having varying
levels of visible light transmission. In general the lower the visible light transmission
(VLT), the higher the solar heat rejection.
Sputtering is a versatile process as several layers of different metals can be applied
to a single piece of film resulting in unique colors and higher levels of selective
transmission. Sputtered films have excellent heat control properties.
Generally, the most effective solar control films in terms of solar heat rejection are
metallised films that have a low VLT in the 15 to 20 percent range, and a high heat
rejection factor in the 70 to 80 percent region.
For further information contact:
Window Film Association
Phone: 498 5....
Fax: +61 2 9498 3816
Web: www.wfaanz.org.au
|
