Road stabilisation with Soilbond natural sealant
The principal ingredient in Soilbond® is a naturally sticky material that
provides the binding power of Soilbond® and allows the effective stabilisation of roads,
tracks and paths.
The principal ingredient is a waste product from the processing of timber to produce pulp
for paper manufacture. These waste materials are then processed to separate the components
into a number of different products, one of which is used to make Soilbond.
The naturally derived product from wood has no solubility in water and this means that it
will not be flushed out of roads or paths under wet conditions and so there are no concerns
about adverse environmental effects from its use.
Soilbond® is specially formulated into an easily handled liquid product and allows it to be
easily and uniformly mixed into the materials used to form roads and paths and provide the
most effective binding action.
Soilbond® Applications
- Stabilisation and dust control of unsealed roads and road shoulders.
- Granitic sand stabilisation for pedestrian paths and tracks.
- Pavement stabilisation.
Stabilisation is easy with Soilbond® as;
- Environmentally friendly alternative to petroleum products and chlorides.
- No wash out by water.
Soilbond is produced in Melbourne and stocks of the product are readily available. We can
supply the product in small packs (20 to 200 litres drums) for small jobs, 1000 litres
Intermediate Bulk Containers and in bulk loads in road tankers (15,000 - 25,000 litres) for
medium to large jobs.
| 
