Insulated Plasterboard from Dynamic Composite Technologies
DCT Thermalcheck Insulated Plasterboard
Designed to facilitate fast installation of liner and
insulation simultaneously, DCT Thermalcheck consist
of *Dow STYROFOAM LB insulation pressure bonded
to gypsum plaster board. This economic, easily installed
lining system allows you to insulate and line walls in
one simple operation, using normal fixing methods.
Suitable for stud, brick and masonry walls and ceilings,
DCT Thermalcheck has a high compressive strength
and moisture resistance, providing unique thermal
insulation properties.
DCT Thermalcheck is lightweight and can be easily
installed using the same fixing methods as ordinary
plasterboard. The need for battens and separate
insulation is eliminated, thereby speeding up
construction time and providing a durable internal
lining system. No special tools are required, as boards
can be cut using standard hand tools.
Renovating an older home becomes less of a challenge
now that DCT Thermalcheck provides a fast, trouble
free method of plastering and insulating walls and
ceilings, including suspended ceilings.
DCT Thermalcheck provides unrivalled resistance
to water vapour or moisture, thereby solving problems
with slightly damp areas, such as bathrooms.
An extremely effective thermal insulator, DCT
Thermalcheck insulated board's high insulating
properties will assist in maintaining controlled
temperature conditions for the life of your home.
Thermalcheck Super
DCT Thermalcheck Super insulated plasterboard
comprises *Kingspan Kooltherm K10 rigid phenolic
insulation pressure bonded to gypsum plaster board.
This premium insulated plasterboard can be installed
directly on to concrete soffits, timber battens or to a
proprietary grid system in one easy step.
*Kingspan Kooltherm® K10 soffit board is a
premium performance CFC/HCFC-free, rigid phenolic
insulation board. With a closed cell structure, K10
resists both moisture and water vapour ingress, plus
is unaffected by air movement - problems which can
be associated with open cell materials such as mineral
fibre and which can result in reduced thermal
performance.
Safe, easy to install and handle DCT Thermalcheck
Super is ideal for your new build projects and can be
used to upgrade levels of insulation in buildings that
have insufficient or no insulation easily, quickly and
cost effectively.
Thermalcheck Plus
DCT Thermalcheck Plus boards consist of a laminate
of recessed edge gypsum plaster board pressure
bonded to *Dow PIR foam sheathing. Thermalcheck
Plus insulated plasterboards allow for installation in
one easy step, using the same fixing methods as
ordinary plasterboard.
Suitable for stud, brick, masonry walls and ceilings in
new or refurb projects, DCT Thermalcheck Plus
provides a continuous layer of insulation across studs
in timber frame walls removing the 'thermal shorts'
that occur at the framing which can reduce the
insulation value of a conventional wall by up to 20%.
*Dow PIR is a non structural, rigid board insulation
consisting of a glass fibre-reinforced PIR foam core
laminated between smooth, reflective aluminium foil
facers on both sides. The glass-fibre reinforcement,
along with chemical modifications, contribute to
improved fire performance and dimensional stability.
Manufactured using a structural waterproof
polyurethane adhesive, Thermalcheck Plus boards
are easy to handle and quick to install. The insulated
board is ideal for lining cold wall faces especially cellars
and concrete slab construction.
The thermal resistance of Thermalcheck Plus also
eliminates the problem of surface condensation, saving
wear and tear on surface finishes.
For further information contact:
Dynamic Composite Technologies
Address: Unit 8, 171-175 Newton Road, Wetherill Park, NSW, 2164
Phone: 02 8788 9....
Fax: 02 9604 7....
Web: www.dctech.com.au
|
