XP15W wireless self-aligning safebeam by FAAC Australia
FAAC is pleased to announce the release of the NEW XP15W wireless self-aligning
SAFE-BEAMS. This new product makes the installation a lot easier as it's a clever beam system that
save you the time of looking for the perfect alignment.
The key features of the XP15W are;
- The transmitter is supplied with batteries.
- Self-aligning mechanism.
- 4 selectable transmission channels (enabling you to install up to 4 pairs of photocells on the same system).
- The transmitter can also be connected with a cable if you do not wish to use batteries.
How does it work?
The battery supply on the transmitter allows for a quick installation time, and secondly, allows
you to install the photocell in places that could not be reached with a wired solution. When supplied
with batteries, the photocell just needs to be surface mounted or you can use the optional pivoting
wall brackets or stands. The CR2 3V battery lasts between 2 to 3 years, depending on
environmental/installation conditions
If the battery level is low, an LED on the receiver will warn you with rapid blinking. When the
battery is completely discharged the gate will open and the receiver will go into a "safe" mode
and will NOT enable the gate to close until the batteries have been replaced. This safebeam can
also be installed with a wiring cable.
The maximum achievable distance between transmitter and receiver is 15m.
About FAAC and Our Products
FAAC products are extremely reliable, thanks to the expertise and the technical skills developed
by our research and development and production teams in more than 40 years of operation in this
sector.
For further information contact:
FAAC Australia Pty Ltd
Address: Unit 42, 378 Parramatta Road, Homebush, NSW, 2140
Phone: 02 8756 5....
Fax: 02 8756 5....
Web: www.faac.com.au
|
