Hot and Cold Pipe Ferrules from Ecowise
Formshield Polybloc
- The Thermalock Profile ensures a tight airtight finish.
- The Thermalock decreases installation time as it easily locks together
- Closed cell so will not absorb moisture, will not degrade with time
- High Dense PE foam will not compress.
- Will not erode with Pipe movement.
- Made from recycled material, can be recycled
Available Wall thicknesses: 10 mm , 20mm, 25mm, 38 mm and 50 mm wall.
Standard fitted width is 50 mm, however75 mm & 100 mm is available on Request.
Quick, easy and safe application.
No more cutting. This ensures a flat face to butt insulation
against, allowing a tight and secure joint.
No Fibers, No dust, No mess to clean up afterwards.
No special face masks or gloves required.
The bloc is Light but extremely tough. Just place
the two pieces over the pipe squeeze together
gently, place AS1530.3 approved foil tape and
wrap round ensuring complete coverage of the
polybloc when a vapour seal in required.
Compliance with BCA Fire Hazard properties.
Formshield Polybloc complies with the Building Code
of Australia (BCA)Specification C1.10 Fire Hazard
properties for materials used in Class 2 to 9
buildings.
For further information contact:
Ecowise
Address: Rear of 3/20 Tucks Rd, Seven Hills, NSW, 2147
Phone: 02 9624 2....
Fax: 02 9624 1....
Web: www.ecowiseinsulation.com.au
|
