Spec-Net Building Index - Home
Spec-Net Header Line

logo -




Spec-Net Terms of Use

 

Hydronic Radiant Floor Heating & Cooling from Hunt Heating

radiant floor heating

floor heating

HIGH PERFORMANCE AND DESIGN

Underfloor heating and cooling is a clean, safe and zero-allergen central system with extremely low maintenance costs. Water is circulated through a network of highest quality Hunt Heating pipe laid in the floor slab. The system operates at low water temperatures reducing operating cost to a minimum.

The floor slab transforms into a slow release heat/ cool bank providing uniform temperature throughout. Underfloor radiant systems are almost aligned with the "optimum heating/ cooling curve" as defined by the HVAC industry.

radiant floor heating

floor heating manifold
Manifold system features

  • Compact in design
  • Up to 12 circuits per manifold
  • Control valves for every circuit
  • Built in flow meters
  • Right or left hand connectors
  • Air bleeders included
  • Isolating valves included
  • Fill/ drain valves included
  • Temperature gauges included
  • Electronic heads available
  • Pipe centres set at 50 mm

floor heating pipe

PIPE (PEX)

  • Manufactured / Tested to DIN 16894/ DIN 4726
  • Oxygen barrier protection
  • 16 mm diameter x 2 mm wall
  • 200 m coil length
  • Temperature range: -20 ° C + 95 ° c
  • Continuous operating temperature max: 70 ° at 8 bar
  • Made in Germany
  • Zoning control available

dividing line  

For further information contact:
Hydronic Systems Aus P/L T/A Hunt Heating
Address: 11 Fiveways Blvd, Keysborough, Vic, 3173
Phone:   1300 001 8...
Fax:   03 9798 5....

Web: www.huntheat.com.au

To send an email to Hydronic Systems Aus P/L T/A Hunt Heating, fill in the form below:

You Are: (* = required)

Project Stage:

*
*

Details