Adhesive Backed Tactiles Installation from Safety Floorings
Comcork "Place n Press" Tactiles Installation Instructions
Thoroughly sweep and clean surface
Wire brush ground-in dirt if necessary
Clean off fine dust with Acetone
Peel back half the release paper.
Position Tactile in the desired location ensuring they are square.
Remove remaining release paper as the tile
is lowered.
Tap firmly with a hammer or hammer and block along all outside edges as well as between all studs.
Once Tactiles are installed, they can be trafficked immediately.
For further information contact:
Safety Flooring Pty Ltd
Address: 3/37 Leighton Place, Hornsby, NSW, 2077
Phone: 02 9987 1777
Fax: 02 9987 1977
Web: www.safetyflooring.com.au
|
