Bathroom Renovations and Underfloor Heating from Coldbuster

Renovating bathrooms is probably one of the most common building projects that Australians undertake. Changing the tiles, installing a modern shower space, adding a spa bath and modernising are all great reasons to renovate your bathroom. It also provides the opportunity to install floor heating at a very reasonable cost, particularly if you can install it yourself. Coldbuster floor heating kits make this all possible.

Underfloor Heating is now considered a safe, design friendly, and cost effective heating solution. With the Coldbuster thin under tile heating system, floor and threshold levels do not need to be affected, because the heating element is absorbed in the glue thickness below the tiles. Floor heating kits for average bathrooms range between $450 to $650 including a programmable thermostat. The energy savings compared to overhead IXL heating lamps are substantial, because the floor heating will consume on average between 375W to 600W, compared to 2000W, for a 4-lamp IXL overhead heater. It also provides much better comfort at floor level rather than at head level and a more natural even warmth rather than a hot stuffy direct heat. Radiant heating from the floor creates a warm atmosphere that heats the body from the feet up. With the use of Thermostats you can have complete control of the day to day time scheduling as well as manual on off selection. Rapid heat up times mean that you experience the warmth very quickly - saving energy and keeping costs under control.

Coldbuster offer DIY kits with the heating cable configured onto a 500mm wide meshed roll that can be easily laid to fit the heating area. These kits are available in various length rolls that will suit the smallest spaces up to 18m². These kits are ultra-thin and will easily fit below tiling without effecting thresholds. You can also use the Coldbuster Screed/Slab 5mm cable system that comes in rolls of 10m to 155m lengths.