Fibreglass Mesh for Reinforcing Waterproofing Compounds by Mapei
Fibreglass Mesh
Alkali-resistant fibreglass mesh for reinforcing interior and exterior levelling compounds.
Alkali-resistant Fibreglass Mesh 4x4.5 mm, 1,000 mm long for insertion as reinforcing in the first layer of Mapegum WP, Aquaflex (specially for asbestos), Mapelastic, Adesilex FIS13, Plastisol 1 and bituminous type products to prevent the formation of cracks caused by tensions generated in the substrate.
Packaging
rolls of 50 m.
Where to Use
Reinforcing for:
- Mapelastic used in waterproofing of terraces,
balconies, swimming pools, bathtubs, shower stalls,
etc., prior to installing ceramic tile or natural stone.
- Protective elastic finishing with Mapelastic applied
over cement-based surfaces with crazing in interiors
and exteriors.
- Waterproofing with Mapegum WP and Aquaflex in
particularly stressed areas, e.g. joints between walls
and floors, etc.
- Mapegum WP and Aquaflex when used as antifracture
membranes over screeds or walls with
crazing in interiors.
- Plastisol 1 when used for repair of cracked
bituminous membranes and with Plastimul when
applied over substrates with crazing.
- Polystyrene, polystyrene foam, rock-wool, and cork
insulation installed with Mapetherm AR1 or mortars
manufactured with Adesilex FIS13.
For further information contact:
MAPEI Australia
Address: 12 Parkview Drive, Archerfield, Qld, 4108
Phone: 07 3276 5....
Fax: 07 3276 5....
Web: www.mapei.com.au
|
