Fire Resistant Seal Promaseal® FyreStrip from Promat Australia
PROMASEAL® FyreStrip
PROMASEAL® FyreStrip (SE) is a compressible, flexible, fire resistant seal which is used where movement joints are formed in the structure of building. It consists of layers of intumescent material bonded to a special foam and has been successfully fire tested up to 240 minutes in joints within masonry or concrete walls and concrete floors in accordance with the relevant criteria of BS476: Part 20, AS1530: Part 4 and AS4072: Part 1.
PROMASEAL® FyreStrip is available in the following dimensions:
- FS20 - 90mm x 28mm x 1000mm;
- FS40 - 90mm x 46mm x 1000mm;
- FS50 - 90mm x 56mm x 1000mm;
- FS80 - 100mm x 84mm x 1000mm;
- FS100 - 120mm x 124mm x 1000mm.
The strips are ideal for sealing movement joints at junctions between compartment walls and floors. Their flexibility makes them suitable for use in a variety of configurations. The fire performance of PROMASEAL® FyreStrip will vary according to the particular application. In addition, the width of the gap into which the strip is inserted, as well as their orientation, will have an effect on the level of protection required.
For further information contact:
Promat Australia Pty Ltd
Address: 1 Scotland Road, Mile End, SA, 5031
Phone: 1800 776 628
Fax: 1800 334 598
Web: www.promat.com.au
|
