One of the advantages of having natural stone is its long lasting beauty so get it now from RMS
Sand, dirt or grit can do damage to any surface so it is highly recommended that interior floors are frequently swept and mopped with a dry dust mop. Placing mats or rugs at the entrance of a hallway or room will also help minimise the problem. Also avoid using cleaning utensiles which could have sharp edges as it will scratch and make the surface lose its shine.
When cleaning natural stone always use a mild non-abrasive cleaning detergent with warm water. A clean mop for floors and a soft cloth for other surface areas should be used. The cleaning product you use should not have vinegar, lemon or acid in its contents as these will do harm to the surface of the natural stone.
In wet areas, eg showers, soap scum can be reduced by appliying a non-acidic soap scum remover and using a squeegee to rub it in and wipe down with clean water.
In food handling areas a penetrating sealer should be applied as it creates a lining between the middle and top surface of the stone. This stops stains from penetrating the natural stone. Check with your installer for recommendations or if unsure, check with a sealer manufacturer.
If a stain has been created, depending how deep it has gone, it can be removed by sanding the stone again. Check with your installer regarding the time and cost to cary out this work.
For outdoor pools or patio floor areas apply a mild bleach solution to the surface and use a light pressure hose to help remove algae or moss build-up.
For further information contact:
RMS Natural Stone & Ceramics
phone: 02 9316 9677
fax: 03 9388 2022
web: www.rmsmarble.com
| 
