Polycarbonate Cladding Systems from Palram Australia
Polycarbonate by Palram - Section J compliant cladding
SUNPAL MULTI is the next generation of standing seam polycarbonate cladding systems. And is the result of over 20 years experience with standing seam roofing and glazing systems. Sunpal Multi is designed to allow free natural diffused light through without the unwanted heat. The multiwall structure acts as a thermal barrier delivering excellent energy efficiency creating a greener Australia.
Sunpal meets the new section J of the BCA when installed in a double glazed configuration and can be made even better by adding insulation. The overall LT will be approx 15% R-value of 1.9*
Sunpal Multi can be fixed either standard or reverse due to the UV coatings on both side of the sheet.
Spans up to 9.0m are achievable with Sunpal using the Spanbar system - The SPANBAR System allows large spans without the need for unsightly purlins or cross members.
The Spanbar System utilizes long spanning aluminum T-rafters that can free span between beams. These T-rafters are light weight but extremely strong, giving clean lines to enhance any building.
*Pending configuration of Sunpal sheets
For further information contact:
Palram Australia Pty Ltd
Address: 517A Cross keys Road, Cavan, SA, 5094
Phone: 08 8262 2....
Fax: 08 8262 3....
Web: www.palram.com.au
|
