Automatic Swing Gates from ABA Automatic Gates
The OBBI geared motor has been designed according to the traditional basic concept of the ring / worm screw reduction gear. Its structure houses a motor, a gear, the worm screw and an unlocking system. The OBBI system is suitable for moving even gates with very small pillars. Voltage: 24 V DC
The operation of the motor causes the rotation of the ring and thus of the worm screw, which is contained in a compact casing made of anodized aluminium, which in turn causes the movement of the gate leaf via the front connection.
The very slim structure of the actuator allows it to be integrated exceptionally well with the gate, and enables it to be assembled very easily.
The geared motor has a considerable stroke and an opening angle of up to 110°.
In the case of power failure, manual operation is always possible by unlocking the gear with a key, or automatic operation if a control panel with batteries is installed.
For further information contact:
ABA Automatic Gates
Address: 11/13 Foundry Rd, Seven Hills, NSW, 2147
Phone: 02 9674 5....
Fax: 02 9674 8....
Web: www.abagate.com.au
|
