Ready-to-use paste adhesive with no vertical slip and extended open time for the installation of ceramic tiles on interior walls and floors.
Where to Use
- For bonding most types of glazed and unglazed ceramic and porcelain tiles and mosaics on walls and floors.
- For the installation of tiles up to 150 x 150mm on floors and up to 300 x 600mm on walls.
- For the installation of tile on walls in intermittent wet conditions such as tub and shower surrounds provided that one of the surfaces is absorbent.
- Concrete walls, either precast or cast on site (when properly prepared).
- Plasterboard and cement sheeting when installed as per the board manufacturers' instructions.
- For the use over Mapegum WPS or Mapelastic AquaDefense, providing the back of the tile is absorbent.
Technical Characteristics
Mapemastic Easy is a ready-to-use, white paste adhesive that is made using special acrylic resins, graded mineral fillers and additives, prepared according to a formula developed in the MAPEI Research laboratory. Mapemastic Easy is smooth and easy to trowel with nonslump characteristics that allow vertical tile installations without the need for spacers.
Mapemastic Easy has an excellent initial grab and bond strength with the additional benefit of an extended open time. Mapemastic Easy is solvent-free resulting in a very low VOC content that meets and exceeds the criteria required for Green Star™ certification.