Ceiling Heating Foils from Devex

Devex proudly supplies Devifoil, which consists of a thin metallic film, sandwiched between two layers of a transparent high temperature plastic. The metallic film is designed to open circuit below the melting point of the plastic laminate.

Devifoil is manufactured in standard lengths, widths and loadings and come complete with cold tail connections and labeling identification.

The devifoils can be placed in the ceilings or walls maintaining a minimum of 2.3M above floor level. The foils can also be placed in a sloping ceiling with a minimum of 2M above floor level and with a maximum slope of 45°. The foils may also be built into seats in churches. A heat load assessment for each heated area is carried out before installation, with approximately 70-80% of the ceiling being covered by heating elements.

If the ceiling heating is to be used in conjunction with another heat source, for example; off-peak floor heating, then only 50-60% of the ceiling would be covered. When planning the layout for a devifoil installation particular notice should be taken to ensure a clear space of 100mm is maintained from all ceiling fixtures such as light fittings, sprinklers, ventilation ducts, cupboards, shelves or any other fixtures that are in contact with the ceiling.

Devex Systems Profile

1800 636 091

5/83 Bassett Street, Mona Vale, NSW, 2103

VISIT WEBSITE