Grip Guard non-slip floor treatment essential for floor safety
Grip Guard is a floor treatment that microscopically modifies the floor surface
to increase its slip resistance. Grip Guard is not a coating and therefore will not wear off the
surface of the floor. Grip Guard is a controlled non-slip application which is only available
for use by licensed, fully trained Grip Guard operators.
Grip Guard non-slip treatment is suitable for all stone-based floor surfaces including: tiles,
including ceramic, quarry, terrazzo, marble granite, and porcelain as well as concrete and aggregate.
The Grip Guard non-slip process that treats floors to make them more slip resistant - especially
when wet. All surfaces are tested for slip resistance using an ATSM slip meter prior to treatment.
Following treatment, slip resistance measurements are again taken and included on the Grip Guard
warranty. The standard Grip Guard warranty is two years. While it is expected that the Grip
Guard non-slip treatment will continue to be effective beyond this time period, this term allows for
the wear and tear in areas where vehicular traffic occurs.
After Care
As Grip Guard non-slip treatment actually modifies that floor surface (rather than coating it),
the Grip Guard treatment remains intact as long as the surfaces is not worn away such as in the
case of areas which are subjected to vehicular traffic such as forklifts.
However, it is essential that floors are kept clean and free of debris or contaminants. If, for
example, in a kitchen application, the treated floor areas becomes covered with a buildup of fats,
this will effectively create a barrier between the Grip Guard treated surface and the foot. The
floor surface will continue to retain the anti-slip qualities achieved using Grip Guard treatment
but they may be ineffective if a buildup of fats/contaminants is allowed to accumulate.
Grip Guard has two after care products available to clients, Traction Guard and Traction Guard
PLUS (for very greasy environments). While not essential, each of these products has been
formulated to eliminate contamination and increase slip resistance.
Grip Guard floor safety solutions are available throughout Australian including Victoria (VIC),
South Australia (SA), Western Australia (WA), Queensland (QLD), Tasmania (TAS), and the ACT.
For further information contact:
Grip Guard
Address: Frankston, Vic, 3199
Phone: 1300 304 7...
Fax: 03 9781 2....
Web: www.gripguard.com.au
|
