One-Component Parquet Floor Adhesive from Mapei

Ultrabond Eco S955 1K
One-component, solvent-free, sililated polymer-based adhesive with a very low emission level of volatile organic compounds (EMICODE EC1 R Plus), for all types of parquet.

WHERE TO USE
Bonding wooden parquet and all types and formats of pre-finished materials.

Some application examples
Ultrabond Eco S955 1K is used for bonding pre-finished materials, lamparquet, slats, floor-boards and all types of parquet on: cementitious screeds, screeds made using Mapecem, Mapecem Pronto, Topcem, Topcem Pronto and similar products, old wooden floors, ceramic, marble, terrazzo, etc. and anhydrite screeds. It is also suitable for heated substrates.

TECHNICAL CHARACTERISTICS
Ultrabond Eco S955 1K is a one-component, sililated polymer-based adhesive without water, solvents, with a very low emission level of volatile organic compounds (EMICODE EC1 R Plus). It is manufactured according to a technology developed in MAPEI's own research laboratories and has the following characteristics:

• one-component, ready-to-use product; no catalyser is required, therefore no mixing. If stored correctly, remaining quantities of the product may be used again at a later date;
• suitable for use by installers who are allergic to epoxy and epoxy-polyurethane products;
• GEV certified, as a product with a very low emission level of volatile organic compounds (EMICODE EC1 R Plus);
• compatible with Ultracoat and Ultracoat Oil water based varnishes and undercoats;
• no hazard risks and risk and danger symbols;
• easy to apply with excellent ridge holding;
• 20-30% more yield compared with conventional two-component adhesives, thanks to its low viscosity and free-flowing properties when applied by trowel;
• totally free of solvents;
• easy to remove from hands and pre-finished elements.