Ultra-Fast Drying Self-Levelling 1-10mm Compound from MAPEI

Ultraplan Fast Track smoothing compound from MAPEI

Classification According to EN 13813

Ultraplan Fast Track smoothing compound as described in this data sheet is classified as CT-C40-F7-A2_fl-s1 according to European norm EN 13813.

Where to Use

Ultraplan Fast Track is used in interiors for levelling and smoothing differences in thicknesses from 1 to 10mm on new or existing substrates, preparing them to receive in a very short time (2 hours) all kinds of floorings, including resilients, textiles and multilayered wood.

The use of Ultraplan Fast Track is recommended where a high resistance to static and dynamic loads is required. Ultraplan Fast Track is especially suitable for restoring resilient floors which have to be ready for use in quick times.

Some Application Examples

Levelling concrete slabs and cementitious screeds or Topcem, Mapecem, Mapecem Pronto or Topcem Pronto based screeds.
Levelling anhydrite substrates.
Levelling over underfloor heating systems.
Levelling existing concrete substrates, terrazzo, ceramic and natural stone.

Technical Characteristics

Ultraplan Fast Track is a grey powder consisting of special cements with rapid setting and hydration, with selected graded silica sand, resins and special additives prepared according to a formula developed in the MAPEI research laboratories.

Mixed with water, Ultraplan Fast Track becomes a fluid and easily workable mortar, perfectly self-levelling, with high bonding strength to the substrate and ultra-fast drying.

Ultraplan Fast Track can be spread in thickness up to 10 mm per coat without shrinkage, cracking or crazing, and develops very high compressive and flexural strength as well as resistance to indentation and abrasion.

For thicknesses greater than 10 mm (max. 20 mm), it is recommended to add about 30% of graded sand 0.4 mm over a mechanically keyed floor only.

Ultraplan Fast Track dries in quick times: independently from the application thickness, the surface can be sanded and all kind of floorings, including floorings sensitive to moisture, such as resilient coverings and multilayered wood, can be installed after 2 hours.

Recommendations

Do not add water to a mix which has already begun to set.
Do not add other binders (lime, cement or gypsum).
Do not use Ultraplan Fast Track for exterior leveling works.
Do not use Ultraplan Fast Track on substrates subject to continuous rising damp.
If another layer is required, the previous coat must be completely dry. Before application of the layer it must be primed first (for example with Primer G or Eco Prim T diluited 1:2 with water).
Do not use Ultraplan Fast Track on wood planks, metal, rubber, PVC or linoleum.
Do not use Ultraplan Fast Track when the temperature is below +5°C.
Do not apply Ultraplan Fast Track in thicknesses less than 3 mm if multilayered wood is to be overlaid.