High pressure industrial cleaning from Washforce
The washforce hard surface cleaning system is quite different from
other high pressure cleaning. The system uses high pressure hot or cold water under
constant vacuum. There is no pooling or over spray, enabling quick drying time.
The process is fast and the surface is ready for immediate use!
All waste water is captured, preventing contamination of surrounding areas e.g.
expensive stock, electrical boxes, machinery and synthetic grass etc. The dirty
water passes through a series of filters removing solids and debris. It can then
be directed it to an appropriate location that satisfies the EPA and Sydney Water
requirements. No run off to the storm water will occur.
Keeping outdoor and indoor surfaces clean and free of dirt, grime moss and mould
not only contributes to a welcoming and attractive environment, but also meets
OH&S regulations to maintain safe and non slippery floor surfaces.
No hazardous chemicals are used which is safe and has as environmental benefit.
Washforce has a Sydney Water permit issued for extremely efficient water usage and
control of water application and wastewater.
The cleaning process is so effective in leaving the floor sanitised, dust free and
clean that coatings can be applied to the surfaces. These include epoxy resin,
sealing floor, concrete water proofing My company can offer a high level of trust
worthiness and professionalism and can clean outside of the operating hours of the
centre.
The Washforce cleaning system has worked perfectly for the the food manufacturing,
warehousing and freight forwarding industries. No spray - stock preserved, areas that
need a good clean but have no effective drainage are no problem. Cleaning with hot
water at 120°C leaves floors and drains sanitised. Washforce specialises in
pre-food safety audit deep cleaning.
Washforce also specialises in cleaning car parks, paths, and outside entertainment
areas. The process is environmentally friendly that leaves hard surfaces free of dust,
debris, chemical residue, fats and oils. Concrete, paver's, exposed aggregate, and
tiles can be rejuvenated.
For further information contact:
Washforce
phone: 0425 368 194
fax: (02) 9580 5652
web: www.washforce.com.au
|
