Waterplex eco sacs® - capture rainwater
When you buy an ecosac® you get everything you need to start capturing
rainwater other than the plumbing to the ecosac®. eco sac® fills from the side. This
means that less height clearance is needed than with top-fill bladder systems. You only
need 700mm in total. The inlet/outlet pipes are supported in a fixed position by a metal
mounting plate which is screwed into the frame and hence acts as a support brace for the
pipework. This means that there is no movement and no risk of leakage or strain on the
fittings. This is a unique and patented feature of the eco sac® which sets it apart from
other brands and, importantly, ensures a static plumbing system. There are absolutely no
"o" rings to keep lubricated so maintenance is minimal.
Furthermore, the pipework is easy to access at the end of the sac rather than running
under the sac with the weight of the water on top of it like some brands.
The bladder tank is protected from the ground by a strong sling of geo textile fabric
which slips around the galvanised steel frame. The eco sac® does not need to sit on a
concrete pad or pavers but we do recommend a paver goes under each leg (flush with the
ground).
The durable pvc of the bladder has been tested and accredited to the AS 4020 potable water
standard. This means that the water stored in it is safe for human consumption, safe for
topping up swimming pools and safe for filling fishponds.
For further information contact:
Eco Sac Pty Ltd
phone: 1300 726 670
fax: 02 9113 5597
web: www.ecosac.com.au
| 
