Product Description Applications Standard Sizes & Packing Physical Properties Testing Quality Assured AS/NZS ISO 9002 1994 Approved by BVQI Certificate 19875 Back to Index page

Polyduct D A T A S H E E T ..Product Description Tontine Polyduct is a lightweight, compressible insulation material manufactured from thermally bonded polyester. The product is white in colour. ..Applications Tontine Polyduct is for use around flexible ducting in domestic and commercial heating and cooling systems where acoustic and thermal insulation is required. ..Standard Sizes & Packing Tontine Polyduct is available in various grades (including R1.0) and sizes to suit most manufacturers duct sizes. For further information as to the available sizes, Contact us now. ..Physical Properties R-Rating: Roll Length: Roll Width: Melting Point: Vapour Pressure: Per Cent Volatiles: Specific Gravites: Flash Point: Flammability: Other Properties: Ingredients: Max Service Temp: Alkalinity: Moisture Absorption: Up to and including R1.0 Up to 36m To suit specific duct diameters 250 degrees C. Not Applicable. Nil. 1.38. Not Applicable. Complies with Building Code of Aust. Non-allergenic, low irritant, resilient. Organic, Long chain polyester polymer. 150 degrees C. pH 7.8 (pH 7 is neutral). Exposure to an atmosphere of 50 C & 95%RH for four days gives a moisture absorption of less than 0.2% by volume. ..Testing All testing was conducted in a laboratory situation. On site results may vary due to site conditions and quality of installation. As these products are constantly being researched and developed, we reserve the right to update these specifications without notice.