Sandpiper SO5 Pumps from Kelair Pumps Australia
Case Study
Sales Engineer Frank Molinaro (VIC)
Sandpiper seals leakage
problem
Kelair was approached by
a customer to solve a diaphragm
pump leakage
problem.
The customer was using a
non-Kelair brand 1/2" nonmetallic
diaphragm pump
that was forever leaking at
the top manifold / main
body interface.
It was observed at this
point the pump only had 2
x 2 bolts (4 bolts in total)
connecting the top manifold
to the main body.
As the customer was using
this pump for a high pressure
spraying application
the pump consistently
leaked from the top manifold.
The customer then trialled
a Sandpiper S05 nonmetallic
pump with 2 x 4
bolts (8 bolts in total ) connecting
the top manifold to
the bottom manifold.
The pump proved successful
with no leakage occurring
even with the pump
being dead-headed at 6.5
bar air pressure.
The customer also liked
the fact the pump was
much more robust, with
thicker housing, manifolds
and threaded connections.
Overall the customer was
very happy with the quality
of the pump.
For further information contact:
Kelair Pumps Australia Pty Ltd
Address: 215 Walters Road, Arndell Park, NSW, 2148
Phone: 02 9678 9....
Fax: 02 9678 9....
Web: www.kelairpumps.com.au
|
