3001 water repellent concrete & masonry from Nanovations
Concrete sample 24 hours after pouring and already water repellent.
Common surface sealants for concrete and masonry tend to wear
off and be subject to weathering and abrasion, and need regular re-applications.
Now Nanovations Pty Ltd is introducing a product that is a new concept in concrete
protection technology.
The product, known as 3001, is simply added to the concrete or masonry during the
mixing process, providing it with water repellent properties and complete protection
from efflorescence (the formation of white powder on the surface of the concrete),
salt, and moss and algal growth.
3001 significantly reduces rising damp, thereby preventing paint bubbling and lifting
of exposed surfaces. It also results in masonry being more stain resistant, and
protects coloured concrete products from unsightly discolorations. 3001 protects
pavers used in coastal areas or near swimming pools from salt and chlorine damage.
Concrete with added 3001 is water vapour permeable. However, after the normal curing
time, the concrete or masonry product has a significantly lower water absorption rate
than that of untreated concrete.
The bulk impregnation for complete concrete parts, pavers and masonry or roof tiles
can't be worn off like surface treatments. Surface abrasion and high traffic which
usually wears off any sealer will not affect the treatment and the function.
Concrete treated with 3001 is also frost/thaw resistant, which makes it especially
suitable for climates with severe winters including North America, and northern Europe
and Asia.
Because of Nanovations 3001's mass impregnation technology, common surface sealants
are no longer required. In addition, concrete additives for salt resistance and the
prevention of efflorescence can be avoided. Unlike common surface sealants, 3001
requires no re-application, saving considerable expense and inconvenience.
"3001 is completely water-based and VOC free," says Harry Stulajter, Director of
Nanovations. "The product has been tested for salt resistance, efflorescence, water
absorption and frost/thawing behaviour."
Nanovations welcomes enquiries from concrete, pavers and masonry manufacturers, as
well as concrete mould producers and any professional organisations involved in
the industry.
To find out more about Nanovations 3001 go to http://www.nanovations.com.au or
email info@nanovations.com.au.
Concrete stored in water 48 hours in water. There is no
visible rising damp. Concrete above the waterline stay completely dry.
For further information contact:
Nanovations
phone: +61(0)2 9975 5602
fax: +61(0)2 9975 5602
web: www.nanovations.com.au
|
