NEWS ARTICLE ARCHIVESElectric Stone and Tile Supportclip Cutter from StoneClipAfter we started marketing the air driven Supportclip cutter we were made aware by the installers that they wanted the electric version also. Photo 1 - Here we have the air driven one that is at home in a workshop where there is good supplies of air, as it takes about 18cfm to run flat out all the time.
Photo 2 - This is the portable jig that suits both models - air and electric (Bosch 100mm grinder). The jig is standard for both and the top clip for a ZERO joint is cut in on center with the aid of the jig on a marked line down 50mm from the top edge. The bottom cut is 20mm up from the bottom edge. As you change the joint width you only move the top cut - eg 2mm joint means a mark is made 48mm from the top edge.
Photo 3 - This is a photo of the 100mm electric Bosch 100mm grinder (available at all Bunnings stores in Australia), with the 65mm diamond blade installed. Both the models of the cutters (air and electric) are available for sale online for with a box of 100 Stainless Steel Slimline Supportclips and screws delivered free in Australia. All Stoneclip products are available online. |