 |
      
DOOR ORDER CODES
|
| MAE |
Moulded all edges: refer to edge
pattern ordered. |
ISQB |
One square edge, bottom, with the remaining edges moulded. |
| ISQR |
One square edge, right hand side,
with the remaining edges moulded. |
FO |
Glass door frames only. Diagram required. |
| ISQL |
One square edge, left hand side,
with the remaining edges
moulded. |
DRAWERS |
Indicate whether MAE or square between. Draw diagram and indicate. |
| ISQT |
One square edge, top, with the
remaining edges moulded. |
|
|
Please keep Door Order separate from Panel Order...
Except for: Raised Panel. All other centre profiles can be either 60mm or 82mm to the centre. Standard is 82mm
unless specified. |
PANEL ORDER CODES
|
| W.O.P. Wall Oven Panel. Indicate whether MAE or: |
2L Two long edges moulded
2S Two short edges moulded |
| Panels and Bar Backs: Describe best with plan. Elevation drawing if centre
profiles are required. |
| EXAMPLES: |
|
1 Face 1 Long Return 40mm. Square edge. |
| |
2 Face 1 Long 4mm or 6mm. 180o Rounds. |
| |
1 Face 1 Long Return 40mm, 4mm or 6mm. 180o Rounds. |
| Note: |
Panels with round edge. No foil top and bottom. No centre profile unless
specified. Full wrap panels with bull nose maximum size 2400 x 650. |
| Note: |
All bar back panels in timbergrain maximum 1200 wide, joined at 1200 centres. |
TIMBER VENEER RANGE
|
Huge range of natural and reconstituted timber veneers stocked with world
wide access to exotic species upon request. Any Timber Veneer can be wrapped.
Contact us now
for the extensive colour ranges for Panel Flex Foil and Melaform. |
NOTICE: Five Star Finishers does not and will not be at all responsible
for veneer products coated with any type of lacquer finishers. We strongly suggest that customers contact their
supplier for recommended veneer coating finishes. The manufacturer and supplier of timber veneer coatings are the
only qualified people to recommend and to supply you with technical data required for certain species of veneer
coatings.
If you are using New Age Veneers, 2 pac Polyurethane is strongly advised, and must be used on beech - single pac
lacquers are not appropriate.
Doors with melamine back must have the exposed edge sealed and coated. For further information, please contact us now. |
  
|
|
