Rocks On Hard Surface Solutions' Rock & Rock natural stone

Rock & Rock is produced using an exclusive technology called "Tallado" involves rectifying (cutting) the raw material before firing in the kiln. This allows for the perfect natural finish, producing textures and colours that are only compariable to the most exquisite natural stones.

Commercial & residential in and out doors, including foyers, shopping centres, public areas, courtyards, living areas, patios, walls inside & out, building facades, step treads and pool surrounds, (with lamination and various edge detail finishes being achieved).

• Origin: Spain.
• Colours:
  • Sandstone Arena (Pale Sandstone).
  • Quartz Ocre (Burnt Terracotta tones).
  • Pietra Serena Gris (Pale Grey tones).
  • York Gris (Mid Grey shades).
  • Travertino Crema (Travertine look).
  • Lavagna Nero (Black Smoke).
• Sizes:
  • 600 x 1200mm.
  • 300 x 1200mm.
  • 600 x 600mm.
  • 400 x 600mm.
  • 300 x 600mm.
  • 300 x 300mm.
• Thickness: 11mm.
• Finishes:
  • Natural surface finish (in & outdoors).
  • Supergrip finish (outdoors only).
• Type: Fully vitrified, random glazing.
• Appearance: Traditional stone, with natural tone & surface variation.
• Production: Double-pressed, rectified edges.
• Technical:
  • Water absorption less than 0.05%.
  • Frost resistant.
  • Scratch resistant.
  • Surface hardness - MOHS 8 (of 10).
  • Stain resistant (hot running water).
  • Chemical resistant.
• Slip Resistance:
  • Natural - Lavagna Nero & York Gris.
  • Australian Standard AS/NZS 4586-2004;
    • Average Coefficient of Friction by Dry Floor Test - 0.79.
    • Classification of Floor Surface in Dry Condition - F.
    • Contribution to the risk of slipping when dry - Moderate to Very Low.
    • Average Pendulum Number achieved by Wet Test - 49.4.
    • Classification of Floor Surface in Wet Condition - W.
    • Risk of Slipping when Floor Surface is Wet - Low.