Stoneclip Stone Cladding and Fixing Collection

Showing the new adjustable StoneSub fixing with an 8 mm adjustable shaft, this system is suitable for all shaft sizes and also suits working on curved substructures.

Showing the new adjustable StoneSub with the Top & Bottom fixing in position to carry 30 mm thick panels and the set StoneSub fixing with the ShockClip mounted onto it.

The Top & Bottom fixing ( 12 mm only ) with a 100 mm long shaft.

Showing the ShockClip mounted onto the set StoneSub landing

Showing the tools needed for tradesman like installation. the 125 mm wet cutter, the 6 mm Router and the 100 mm diamond grinder.

Showing the underside of a 30 mm thick panel of Sandstone with the Top & Bottom bracket installed so it is flush with bottom of panel

Showing the top & Bottom bracket installed into a 30 mm thick piece of Blue Stone.

Showing the shaft sticking out the back of the panels and how snug they fit when installed - the carry the load above without any Epoxy

Showing the front panels flush after installation of the clips.