Square Beam LED Downlight D900 Cube from Lighting Matters

Brightgreen - D900 Cube
16W Warm White LED 240V Gimble Ceiling Downlight Fitting

The Brightgreen D900 Cube is an award winning and world first LED downlight which casts a square light beam. With lumen output equivalent to more than a 50W halogen, this is where lighting and energy efficiency meet.

It has a brightness of 903 lumens, a colour temperature of 3000k and a 55° beam width (also available in 45° and the new 90-30° for hallways). The D900 is also trailing and leading edge dimmable, fits into the same 90mm hole cut out as a halogen downlight and has a comparable light quality with a CRI of 90+.

But the D900 still retains all the eco benefits of Brightgreen LED technology: using only 30% of the power of a 50W halogen and lasting over 15 times longer. It is also UV and fire hazard free and comes with a five year warranty, something that is not offered anywhere else in Australia.

With a sleek silver or white style finish these lights are certainly a great way to completely remove those nasty halogen lights, with a fraction of the consumption and a 70,000 hour life expectancy you can afford to leave the lights on.

The 15 degree adjustable tilt angle ensures that you can reach those areas that are in need of light and brighten up your room.

BrightGreen D900 Cube

Fitting / Base: Complete fitting and housing
Gimble: 15°
Hole Cut out: 90 mm
Wattage: 16 W
Voltage: 240 volt AC (external LED universally dimmable driver)
Beam Angle: 45° / 55°
Light Colour: Warm White 3000 K
Lumen Rating: 903 lm
Light Quality (CRI): 90+
Life Span: 70,000 Hours
Dimmable: Yes (suitable for clipsal CBUS applications)
Warranty: 5 Years

Installation
The Brightgreen D900 Cube has a plug pack attached to the pack so the product is DIY, however you may need an electrician to install 240V sockets in your ceiling if you don't have them already.

Dimming
Uniquely, the D900 Cube is dimmable straight out of the box using standard leading, trailing or universal Triac dimmers. It can also be dimmed using an Analogue 0-10V input to through the Brightgreen M-Dim. The M-Dim can also be used with the DH1 to automatically regulate light levels as they change throughout the day.