NEWS ARTICLE ARCHIVES
Tactile ground surface indicators by Cobbletac Australia CobbleTac Tactile's are available in 4 colour's to meet the 30% luminance contrast requirements of the Australian Standard AS/NZS 1428 part 4 Tactile Ground Surface Indicators in both Hazard and Directional profiles. Permanent Solutions CobbleTac Tactile's are manufactured in tough porcelain to provide a cost competitive permanent solution and are warranted against manufacturing faults for a period of 10 years, when installed to the manufacturers installation instructions. UV Stable CobbleTac Tactile's are UV Stable and have been designed and tested in Australian climatic conditions. CobbleTac Tactile's will retain colour contrast, will not absorb moisture and will remain dimensionally stable for the life of the product. Easy to Install CobbleTac Tactile's are easy to install using standard industry methods and are appropriate for both internal and external applications such as: bus stops, pedestrian crossings, stairs and ramps. CobbleTac Tactile's can be installed into concrete, bitumen, pavers, and over most other substrates. Australian Standards CobbleTac Tactile's meet Australian Standard AS/NZS 1428 part 4 Tactile Ground Surface Indicators and are guaranteed to conform to all of the dimensional requirements in order to provide safe and effective tactile cues for the vision impaired. Available in 300 x 300 x 17 mm thick format. R12 Slip Resistance CobbleTac Tactile's are R12 rated in accordance with the Australian Standards AS/NZ 4586:2004 Slip Resistant of Pedestrian Surfaces. CobbleTac Tactile's exceed the slip resistance guide lines HB197.1999 for external ramps, walkways, pedestrian crossings and all requirements of the Building Code of Australia.
|