Balcony waterproofing Melbourne with BTA Waterproofing

Project: Balcony Waterproofing Revision.
Products used: Tremco P/L Vulkem 350 Base Coat, Tremco P/L Vulkem 351 Beige,Tremco P/L Vulkem 351 Clear Finish.

BTA were engaged as the specialist contractor to rectify the spalled concrete, water leaking into rooms below & the various cracks within the slab.

A "Vee" joint was ground out to various cracks in the concrete surface, and a fast cure polyurethane sealant applied into the formed joints to allow for expansion & contraction.

All areas were cleaned thoroughly prior ready for the membrane application.

The areas were primed with a suitable epoxy based primer.

Tremco Vulkem 350 Base Coat was applied, followed by the beige 351 topcoat, incorporating a Sandstone Aggregate broadcast to give a non-slip finish. Excess aggregate was then removed and one coat of the 351 Clear Finish applied as a final lock in coat.

A folded angle was fixed to the outer edge of the concrete of the balcony, to keep water from running down the wall.