NEWS ARTICLE ARCHIVES
How to work safely and efficiently in a scissor lift or boom lift - South Eastern Access
Falls from height are the most common cause of fatalities on
construction sites. This is particularly so when working from unsecured ladders
or unstable scaffolding. To maximise your safety at height you should consider
using an Elevated Work Platform (EWP) such as a Scissor Lift or Boom Lift.
However when using an EWP you must consider the following safety issues;
- Do not operate an EWP unless you have received training in its use and
safety rules. Ask South Eastern Access about training for your "Yellow Card"
through the EWP Association of Australia.
- Never use an EWP on soft, uneven surfaces. Always check for obstacles such
as pits, ramps etc.
- Always wear an anchored safety harness while working in a Boom type EWP.
- Always check that the safe working load written on the EWP is not exceeded.
- The EWP should not be raised in high wind conditions.
(Further information on EWP safety issues may be obtained from the Incolink
Safety Handbook for the Building & Construction Industry 2007).
South Eastern Access are based in Melbourne, Australia. They are an active member
of the Elevated Work Platform Association of Australia. They specialise in the hire
of safe, reliable, modern Access Equipment, such as Scissor Lifts, & Boom Lifts,
|
|