Craftstone® artificial stone veneer is the natural choice for that million dollar look

Cast and mold from chemically improved light weight concrete, CraftStone® is a fine replica of natural stone, capturing even the finest detail that even on close examination, these artificial stone veneers look and feel like the original!

Each range of CraftStone® products is carefully designed and cast from hundreds of different molds, virtually eliminating and repetition.

Advantages

• Light-Weight Features
  Typically one-quarter the weight of the full-thickness wall, eliminating the need for additional footings or wall tiles.
• Versatile
  Comes in various textures and colors that will suit any design, without worries on colour or tonality differentiation.
• Feasibility
  Suitable for both interior and exterior application, with numerous architectural accessories for the finishing touch.
• Economical
  About half the installation cost of natural stone.
• Durability
  Colourfast and virtually maintenance free with 25 years limited warranty!

Technical Specification
25-Year Limited Warranty
CraftStone® products carry a 25-year limited warranty when used on structures that conform to local building codes and installed according to the manufacturer's instruction. Warranty is limited to the replacement of defective materials only. Damages resulting from building settlement, wall movement, force contact, contact with chemicals or paint, discolouration due to airborne contamination, staining or oxidation, will not be covered under the warranty.

Warranty is non-transferable and is only limited to the original purchaser.

Water Repellent
CraftStone® products feature the addition of water-based water repellent that greatly enhances the stone's performance in humid climate. Water repellent is mixed with the composite material during manufacturing, thus providing a more lasting effect than spray, brush or paint method.

Non-Combustible
CraftStone® products show zero flame spread and zero smoke development.

General Properties
Material Composition: Portland Cement, Light-Weight Aggregates and Iron Oxide Pigments.
Unit Weight: 35-45kg/m² (varies according to profile).
Thickness: 20-40mm (varies according to profile).

Physical Properties
Water Absorption: <13%
Open Porosity: <35%
Compressive Strength: >12.0N/mm²
Flexural Strength: >5.0N/mm²