


Maximum Service
Temperature
Compressive Strength
Specification Notes
General Installation
Advice
Back to:
Product Description & Typical
Applications
Quality Assured
AS/NZS ISO 9002 1994
Approved by BVQI
Certificate 19875
Back to
Index page

|
 |
AcoustiSorb 3
D A T A S H E E T

..Maximum Service Temperature |

The maximum service temperature for AcoustiSorb 3 is 90oC. When
used with facings such as Duriod 830 or 850, tolerance of the facing adhesive limits the surface temperature tolerance
to 70oC.
o

Even after prolonged storage under compression, AcoustiSorb 3 has excellent resilience.

State:
- Product name - Tontine AcoustiSorb 3
- Thickness or heat loss / gain criteria
- Type of equipment and operating temperature range
- Whether a vapour barrier facing is required such as Duriod 830 perforated foil.
..General Installation Advice |
- All forms of Tontine products can be cut with a sharp knife. Cutting with rotary cutters is also recommended.
- AcoustiSorb 3 can be fixed to the internal face of ductwork or similar surfaces by impaling on
spot welded metal pins faced to the outside face of the duct at 300-450mm centres in both directions with minimum
of two rows per side of duct.

|