Sydney Flooring Timber Floor Services
Our Services
Yes.. Over concrete. A typical installation over concrete involves covering the slab with a vapour barrier, anchoring
kiln dried hardwood battens to the slab and nailing to battens.
Yes.. Over particleboard. Flooring can be nailed and glued direct to particleboard or plywood.
Yes.. To bearers and joists. Flooring is traditionally nailed to kiln dried hardwood joists or nailed and glued to pine or
Oregon joists.
Yes.. In apartments. You can have traditional solid flooring in an apartment. We use an acoustic underlay covered
with plywood then the flooring is nailed and glued to the plywood. This installation method takes into account sound
reduction requirements for apartments. (always check on individual Body Corporate requirements prior to installation).
Yes.. Floating floors. We supply and install a wide range of pre-finished and finished insitu floating floors.
Yes.. Parquetry. Many species of timber are available in parquetry.
Yes.. Over heated slabs. Using the same method as installing flooring in an apartment we can lay traditional
floorboards over heating. Ask us for further information.
Yes.. Fix to stairs. We can fix tongue and groove flooring to treads and risers on existing timber stairs or over plywood
to concrete stairs.
Yes.. Sand and polish. We can include sanding and polishing when quoting to supply and install your new floor.
Yes.. Supply only. We can supply for your own DIY.
Yes.. Natural stone tiles. We also offer Natural Stone and Porcelain tiles supplied only.
For further information contact:
Sydney Flooring
Address: 21-23 Governor MacQuarie Drive, Chipping Norton, NSW, 2170
Phone: 02 9755 1....
Fax: 02 9755 1....
Web: www.sydneyflooring.com.au
|
