Water tanks built by Australians for Australia from Hunt Tank Industries
Tank Industries, with the support of Hunt Engineering & Staff P/L and its resources, is able to produce cost effective tanks of standard or custom design, in a choice of materials and finishes. Circular Gasket Tanks All bolts are High Tensile, Grade 8.8 and are mechanically galvanised steel. "Malthoid" damp course membrane is layered between tank floor and foundation. Gasket material between all sheet joints are PVC High Density Foam, with a minimum thickness of 6mm and all sealants are high strength Polyurathane elastomer, suitable for potable water. The roof is low pitch construction with Galvabond open web beams, purlins and brackets, including a 600mm square manhole, cover and safety platform. Roof materials are Dualclad Zincalume sheets, fastened with "Tek Screws". The tank level indicator is a "ball float" type, black numbers and red letters against a white background, "E" for empty at the top and "F" for full at the bottom. Indicator backing board and brackets are fabricated of colorbond steel, mounted to the side of the tank. All pipe work penetrations are cleaned and sealed with a protective coating, all flanged pipework connections to the tank are fastened with galvanised steel bolts and nuts. A lockable safety cage and intermediate platform is provided on each tank, where the tank height is 6.0m or above, to AS1657. Tank Foundations The internal area of the ring beam, is filled and compacted to a depth as required by the relevant Australian Standards.
|
Hunt Engineering & Staff Pty Ltd Hopleys Division Profile 03 9551 3077 8-16 Redwood Drive, Dingley, VIC, 3172
|