Hydronic Pipe Template Board from Hunt Heating

Pipe Positioning Board is a polystyrene based insulation and hydronic pipe template in one easy to install product.

Because each panel interlocks with its neighbor Pipe Positioning Board gives you a seamless finish and a strong base with which to start your project. Your pipe simply pushes into place between the specially designed grip lugs, holding it firmly in place.

Pipe Positioning Board
Is not visible once installed, does not use up valuable wall space, and is particularly effective in public areas as there are no exposed or sharp surfaces which can be unattractive, as well as dangerous.

PRODUCT INFORMATION

Panel size	1200mm x 800mm x 55mm
Concrete Screed	*20-50mm cover on top of Pipe
Material Grade	Flame Retardant Expanded Polystyrene
Density	30 kg/m3
Compressive Stress	160kPa @ 10% deformation
Cross Breaking Strength	260 kPa minimum
Max. Contact Temperature	70°C°
Hydronic Pipe Supported	16mm, 18mm and 20mm O.D.
Panel Jointing	10mm over lock on all sides
Cutting Tools	Hand Knife, Handsaw or Hot Knife
Thermal Resistance	R Value= 1.00
Screed Thickness	Minimum 20mm from top of Pipe Positioning Board

* Depending on floor covering over screed

The panel is made from expanded polystyrene combined with a HIPS film, which is added in the final stages of the moulding process. Along with fantastic insulating properties Pipe Positioning Board is light yet durable product which holds hydronic piping in place over existing base flooring. A concrete screed is then laid over the panel and pipe. Climate control is achieved by circulating heated or cooled water through the piping, to help keep a consistently comfortable environment.

Hydronic Systems Aus P/L T/A Hunt Heating Profile

1300 001 800

11 Fiveways Blvd, Keysborough, Vic, 3173

VISIT WEBSITE