Waterbased Waterproofing Range from Bayset
Waterbased Waterproofing Range for the whole building envelop
WPA MEMBRANES
- Designed for the applicator
- Made in Australia for Australian conditions
- From the basement to the rooftop
SB Primer
WPA SB Primer is a clear fast drying solvent based primer with
good penetrating properties. It's designed to assist in gaining
adhesion on powdery substrates and provides excellent adhesion
for subsequent coatings and membranes.
230UV
WPA 230UV is an elastomeric, one part, fibre reinforced, water
based polyurethane membrane used for waterproofing shower
recesses, bathrooms, decks, balconies and rooftops.
360
WPA 360 water based primer is suitable for use with wet area
waterproofing membranes and with correct preparation will
achieve very good adhesion on the following surfaces Concrete,
Plasterboard, Villaboard and FC sheeting.
460
WPA 460 is a two component water based epoxy primer used
to prime most common building substrates.
500
WPA 500 is a waterborne flexible waterproof membrane
designed for use under tiled finishes.
500LV
WPA 500LV is a waterborne flexible waterproof membrane
designed for use under tiled finishes.
560
WPA 560 Moisture Seal is a two component water-based epoxy
designed as a water and vapour proof coating under water
proofing membranes, tiling adhesives, levelling compounds and
timber floors.
880 Tanking
WPA 880 Tanking is a chemically modified waterborne flexible
waterproof membrane designed for use in demanding external
waterproofing applications. WPA 880 Tanking cures to form a
durable, tough, impervious membrane that will not re-emulsify
when fully cured.
|