Epoxy self-levelling flooring from Danlaid Contracting

Self Levelling
Designed to be applied to a substrate in fair to good condition but certainly not a rough surface. If the substrate is rough, some patching would be required prior to application. You can have a non-slip version of this product by adding grit to the formulation. Applications are placed in thicknesses of 2mm to 5mm and will provide you with a very hard and strong, smooth, high gloss floor.

Trowel-Down
This epoxy topping is designed for use in food preparation areas such as bakeries or take-a-way food stores. It is to be used in instances of a rough substrate and is applied at thicknesses of 5mm to 6mm. This product allows you to create falls to waste and will provide you with a general hardwearing floor.

Roller Coat
Only to be applied to a substrate in good condition as this product will not hide any roughness in the substrate. This product is designed mainly for sealing concrete to provide an easy to clean, dust-free surface. It is applied at thicknesses of 1mm to 1.5mm. Roller coat can be applied as acrylic or water-based epoxy but it is not as hardwearing.

Non-Slip Roller Coat
This product is designed mainly for re-coating an existing epoxy floor to either re-apply or add the non-slip feature to the floor. Once again it is applied at thicknesses of 1mm to 1.5mm.

Spread & Sprinke
Can be used on either a rough or relatively smooth substrate and is particularly good over new concrete. It is applied at thicknesses of 3mm to 4mm and can be used to create falls to waste.