How Schweigen Steelflex™ Outperforms Traditional Rangehood Ducting

Discover why tin and other metal ducting does more harm than good- and how the properties of Shirikon Firemesh® in Schweigen SteelFlex™ help.

Every design element of a rangehood is important, including one that is almost always hidden from view- it's ducting.

Tin and other metal rigid ducting are most often employed. However, they are particularly susceptible to the build-up of grease and bacteria within rangehood systems. This is because, on contact, hot airborne grease, fats and oils naturally coagulate and stick to the cold metal.

These deposits present a number of issues:

Growth of mould and bacteria
Attraction of pests and insects
Pervasive musty smell

Moreover, as the deposits congeal further around the bends where airflow changes, air extraction can get impaired over time. Turbulence and noise may result, and worse, old bacteria-ridden oil may actually drip back down the ductwork and onto food being prepared on the stove.

Most worryingly, this grease build-up presents a major fire hazard. Should grease be ignited within the vents (by coming into contact with the stove below or in any other manner)- homeowners run the risk of dealing with personal injury and potential property damage.

How Schweigen Steelflex™ Outperforms Traditional Rangehood Ducting

According to a study by the National Fire Protection Association in the USA: "Two-thirds of home cooking fires began with the ignition of cooking materials. Fat, grease, cooking oil and related were first ignited in half of the home cooking fires that began with cooking materials. Almost two-thirds of the civilian deaths and three-quarters of the civilian injuries and direct property damage resulted from these fires."

There are, of course, alternatives like semi-rigid ducting. However, even this type of ducting can get very greasy and become a breeding ground for bacteria due to the internal ridges present throughout the ductwork. As years upon years of grease and oil build-up, they inevitable present the same issues and risks as above.

The solution is Schweigen SteelFlex™- an ultra-strong and flexible high-performance safety duct made of Shirikon Firemesh®. Whereas tin and other metal ducting pose health, fire and safety risks, Schweigen SteelFlex™ was designed to specifically target these issues using a range of technologies and materials that make this product uniquely fireproof, pest and crush proof with an antimicrobial-treated surface that prevents the build-up of grease and bacteria.

How Schweigen Steelflex™ Outperforms Traditional Rangehood Ducting

This tightly woven, tri-layer tear-resistant UV-treated sleeve is moulded over a low-resistance steel helix rib. It is thermally insulated, acoustically dampened, and specially engineered for efficient high-volume transfers of temperature-sensitive air in HVAC applications.

Schweigen SteelFlex™ is the perfect solution to traditional ducting that may otherwise pose health and safety risks to homes.

Benefits of Schweigen SteelFlex™

Lifetime Guarantee: Enjoy peace of mind with limited lifetime warranties.
Superior Performance: Rigorously tested and certified for superior performance by an independent test facility.
Quieter: Acoustically dampened for extreme low resonance, turbulence and noise.
Bacteria Shield: Treated with an advanced antimicrobial coating to resist pollutant build-up and the spread of surface bacteria.
Tear & Puncture Proof: Engineered for anti-penetrative strength and flexibility in industrial applications.
Temperature Resistant: Tested between -10°C and 80°C to perform optimally across a wide range of operating environments.
Fireproof: Designed with Shirikon Firemesh® for optimal protection against ignitability, flame propagation, heat and smoke release.
Pest Proof: Integrated braided mesh and metal tape reinforcement protect ductwork against even the most desperate and vicious rodents.
Crush-Proof: Robustly constructed to withstand impact without a tear, rip, collapse or separation in excess of industrial tolerances.
Mould Resistant: Inoculated against mould and mildew growth to ensure product integrity and performance in high-humidity operating environments.
Safer & Easier to install: Comes right-sized and ready-cut for quicker and safer installs by specialists and DIY enthusiasts alike.

All Schweigen SteelFlex™ products are independently tested to offer unbeatable strength and safety for the most demanding industrial and commercial HVAC applications.

How Schweigen Steelflex™ Outperforms Traditional Rangehood Ducting

Guaranteed for life*, Schweigen SteelFlex™ works best and comes free with all Schweigen silent rangehoods powered by the German-made Isodrive® Motor System- for silent yet powerful air extraction where cooking takes place.