Product Description Applications Standard Sizes & Packing Physical Properties Performance Data Sample Specification Testing Quality Assured AS/NZS ISO 9002 1994 Approved by BVQI Certificate 19875 Back to Index page

Tontine Sound Batts D A T A S H E E T ..Product Description Tontine Sound Batts are made of polyester, which inherently does not absorb moisture and will not break down. It remains in a safe, clean, hygienic state, thereby not contributing to sick building syndrome. ..Applications Tontine Sound Batts are ideal for use in walls and partitions, where they provide excellent acoustic and thermal performance. Refer to the Acoustic Design Manual to determine which Tontine Sound Batt will provide the best result to meet your requirements. ..Standard Sizes & Packing Product Sizes (mm) No. per pack TSB 2 TSB 3 TSB 4 TSB 5 16.5 x 610 2700 x 610 15m x 610 2700 x 610 15m x 610 2700 x 610 10m x 610 2700 x 610 2 rolls 12 batts 2 rolls 10 batts 2 rolls 10 batts 2 rolls 10 batts ..Physical Properties Melting Point: Vapour Pressure: Per Cent Volatiles: Specific Gravites: Flash Point: Flammability: Other Properties: Ingredients: Max Service Temp: Alkalinity: Moisture Absorption: 250 degrees C. Not Applicable. Nil. 1.38. Not Applicable. Complies with Building Code of Aust. Non-allergenic, low irritant, resilient. Organic, Long chain polyester polymer. 150 degrees C. pH 7.8 (pH 7 is neutral). Exposure to an atmosphere of 50 C & 95%RH for four days gives a moisture absorption of less than 0.2% by volume. ..Performance Data   TSB 2 TSB 3 TSB 4 TSB5 Nominal Thickness (mm) Thermal Conductivity (W/m.K)@23°C STC* NRC R-Value (m2K.W) 50 0.061 43 - 0.8 65 0.061 44 0.50 1.0 75 0.062 46 0.65 1.2 85 0.060 47 0.70 1.4 * STC tests carried out by Challis and Associates Pty Ltd (TSB 2-5), using 13mm plasterboard each side of a 64mm stud frame with 600mm centres. Results in other wall structures available on request. ..Sample Specification The insulation material shall be polyester TSB (2,3,4 or 5)..mm thick as manufactured by Tontine Fibres. The batt shall be fitted in one piece per stud opening to fill the entire area. ..Testing All testing was conducted in a laboratory situation. On site results may vary due to site conditions and quality of installation. As these products are constantly being researched and developed, we reserve the right to update these specifications without notice.