How to Incorporate THERMOMASS Insulation Systems in Concrete Panels by Composite Global Solutions

Composite Global Solutions How to Incorporate THERMOMASS Insulation Systems in Concrete Panels.

If you are using concrete panels for your build and require insulation, check out THERMOMASS from Composite Global Solutions. There are three ways how to incorporate THERMOMASS Insulation Systems in concrete panels: pre-cast, tilt-up, and in-situ.

1. Precast
It is recommended that the internal concrete structural layer is poured against the precast bed. THERMOMASS connectors can then be placed after installation boards are installed.
2. Tilt-up
The tilt-up is the same as precast, the only difference is that the concrete panels are constructed and also finished on-site.
3. In-situ
With the in-situ method, the THERMOMASS Insulation System is placed after the first layer of steel reinforcement is secured onto the open formwork. This will then be closed with the last layer of steel reinforcement and concrete can finally be poured.

To learn more about how to incorporate THERMOMASS Insulation Systems in concrete panels by Composite Global Solutions, head to www.compositeglobal.com.