Spec-Net Building Index
Synteko Pty Ltd

Penetrating Oil Maintenance Guide Video from Synteko

Maintenance of Oil based treated floors.

Periodically the floor should be cleaned using a dry damp mop with Synteko Remover 1692 in a dilution of warm water 1:100, and allowed to completely dry and then recoated with a cloth moistened with Synteko Recover 1620 buffed in with a polishing machine using a red pad (new, non-saturated cloths will always absorb a reasonable amount of oil).

Let the surface dry for 20 minutes and polish with a dry, non-flocculent cloth or white pad. On heavy traffic areas, it may be necessary to apply extra Recover 1620. Buff with a clean white pad whereby footprints are removed and surface is restored.

On especially dirty floors, use buffing machine and brown pad. Use as little water as possible, and wipe floor immediately with a clean cloth. Wait until the floor is completely dry before polishing or treating with Synteko Recover 1620. If the floor looks grey polishing with Synteko Solid 1612 or Synteko Recover 1620 is necessary.

The maintenance and frequency of the above steps, especially the latter, will depend on the traffic and soilage of the floor, but can be reduced gradually from once a month to once every three or four months.



Synteko Pty Ltd Profile

02 9406 8100

19/380 Eastern Valley Way, Chastwood, NSW, 2067

ENQUIRE HERE

ENQUIRE NOW

Video

Synteko Pty Ltd Profile

02 9406 8100

ENQUIRE HERE

ENQUIRE NOW

Video






Related News Articles