Reducing Door Frame Corrosion from Taylors Doors & Frames![]() From the moment a welded door has been installed in your building, severe weather conditions and ambient moist humid coastal conditions can corrode frames. Just prior to installation a typical welded door frame should be re-coated but this adds cost to the initial purchase price. It is also the case that once the frame is installed the exposed surfaces can be re-painted many times over but this does not address the manifold corrosion issues behind the frame in the areas and frame sections where humidity penetrates and that are most difficult to inspect.
A Taylors door frame addresses the corrosion challenge; On a weld for rivet comparison, independent break load tests show SPR creates a stronger join than welding. Leading automotive and aircraft manufacturers have used this joining technology for years so if it is good enough for BMW, Audi and Jaguar why not your next metal door frame!
|
Taylors Doors and Frames Profile 02 9905 1222 20 Orchard Road, Brookvale, NSW, 2100
|