Automated Dosing System from Waterco![]() Avoid heavy penalties with an automated dosing system - Waterco reminds public pool operators about sanitation regulations. International swimming pool and water treatment specialist Waterco Ltd is reminding all public pool owners in NSW to make the switch to an automated or continuous metered disinfectant dosing system. NSW Health brought in new regulations making the use of these systems compulsory for all public pools in September 2012, with certain other states and territories recommending their use. Automated systems ensure the condition of the pool water is kept clean and healthy by constantly monitoring and controlling the pH and the Oxidation Reduction Potential (ORP). "The pH level is important, because the efficiency of the sanitiser is related to the pH level," explains Waterco's Water Treatment Product Manager Victor Quijada. "If you use chlorine as a sanitiser and the pH goes over 7.8, the chlorine will lose about 80% of its efficiency. "ORP is measured in mV, and is a measurement of the capacity of a sanitiser to oxidise and destroy organic matter. For chlorine the recommended value is 720 mV. If you have higher bather load the chlorine demand will increase, and as direct result the pool will experience a drop in the ORP value, indicating that more sanitiser is required." Under the NSW health regulations, pools that are required to use an automated system include pools in hotels, motels and other accommodation, clubs, workplaces, schools, holiday units and hospitals. Non-compliance with the new regulations can result in penalties of up to $17 000 for an individual or $85 000 for a corporation. Waterco's DIGICHEM Plus+ can provide a reliable automated dosing solution for commercial applications such as public pools. "The DIGICHEM Plus+ has been used in the Water Treatment industries for more than 10 years with a proven track record," says Quijada. "Once installed, it'll keep the parameter (mainly pH/ORP) within the set point value; if they fall outside these, the Digichem will try to fix it. If it cannot fix the parameter it'll notify you via SMS and/or e-mail of what is happening so water balance can be restored." The DIGICHEM Plus+ constantly monitors and doses the pool with the appropriate chemicals to keep it at a healthy level. It is also connected to a nominated person that it sends an email/SMS to when the pool needs correction.![]() The key features of the DIGICHEM Plus+ include: Monitoring, control and data logging of:
|
02 9898 8686 36 South Street, Rydalmere, NSW, 2116
|