Pasco Brings Aqua-Seal Gold™ Premium Natural Look Sealer to Victoria

The Aqua-Seal Gold+™ premium natural look sealer is now available in Victoria, exclusively through Pasco Construction Solutions. Aqua-Seal STC™ manufactures a complete range of floor products, such as sealers, cleaners and problem solvers, that meet the demands of Australia's building and construction industry.
What are the Features of Aqua-Seal Gold+™ Premium Natural Look Sealer?
Aqua-Seal Gold+™ premium natural look sealer is made with water-based polymer technology. It serves as an impregnating sealer that provides water protection and stain resistance for natural stone, concrete, porcelain and encaustic tiles, grout, and other masonry substrates
Enjoy the benefits of Aqua-Seal Gold+™ premium natural look sealer, which includes the following:
- Quality stain resistance
- Ideal for both indoor and outdoor use on residential and commercial applications
- Floor protection against oil, grease, grime and dirt
- Minimise possible damages from freezing, thawing, spalling and efflorescence
- Safe to use, no VOCs, non-flammable and non-toxic substance
- Can be used on all types of stone materials (basalt, bluestone, granite, limestone, sandstone), as well as on tile, concrete and grout lines
- UV resistance

Another factor that makes Aqua-Seal Gold+™ unique is the combined formulation of the latest Nano-AQS and Rapid-Seal STS™ technologies. Allowing for fast drying and maximum stain resistance, in just four hours after application. Its breathable compound permits excellent moisture vapour transmission that inhibits mould, mildew and bacteria proliferation.
The clear, straw coloured Aqua-Seal Gold+™ is available in 250mL, 1L, 4L and 20L buckets.
How to Apply Aqua-Seal Gold+™?
- Clean and prepare the floor surface (Sweep, vacuum, wipe).
- While waiting for the area to dry completely, pour the product into the suitable container.
- Apply Aqua-Seal Gold+™ premium natural look sealer with a sealer applicator, sealer sponge, roller or paint pad.
- Using a back-forward motion, work the sealer thoroughly into the surface.
- Don't allow the sealer to dry on the floor surface.
- Wait for 5 to 10 minutes, then wipe the surface completely dry using an absorbent paper or cotton towels to remove any excess sealer.
- If it requires 2 or more coatings of the sealer, allow a minimum of 30 minutes between each coat applications.
- 2 hours after application, conduct a test which determines if the surface is properly sealed by applying a few water droplets onto the floor.
- If the water is absorbed, apply another layer of Aqua-Seal Gold+™ and wait another 2 hours to repeat the test.
- The floor surface is ready for light traffic after 2 hours
Pasco is proud to represent a company that shares the same goal in providing innovative, safe and functional sealants and waterproofing products.
For more information on Aqua-Seal Gold+™ premium natural look sealer and other sealant products, contact Pasco Construction Solutions today.
|